Grooved idler set

一、 What is the grooved idler set?

As the name suggests, the grooved idler support is a grooved angle. According to the different angles, it can be divided into 35 degree grooved support, 45 degree grooved support and 35 degree grooved forward tilt support.

When the belt conveyor needs to form a groove for the convenience of transportation in order to avoid the falling of materials, the groove idler can be used to fix the belt into a groove shape to facilitate the transportation of easily scattered materials. It is also commonly used for long-distance transportation.

Grooved idler is divided into ordinary idler, forward inclined idler, quick change bearing idler, hanging idler, three chain idler, reversible idler, variable groove angle idler, transition idler, v-idler, etc.

二、 What are the performance advantages of the grooved idler produced by Shaoxin?

1. The grooved idler produced by Shaoxin uses the roller skin made of ultra-high molecular weight polyethylene, which has strong wear resistance, light weight and is not easy to be damaged;

2. The R & D grooved idler uses a fully sealed structure, with plastic sealing rings at both ends, so that the grease will not leak and the external dust will not enter the inside of the idler;

3. The surface of the polymer roller is smooth, does not adhere to materials, and the contact friction coefficient with the conveyor belt is small, which reduces the winch driving force;

4. The grooved roller made of high polymer material is corrosion-resistant, and neither acid, alkali or salt has an effect on it;

5. Long service life, 2-5 times that of steel idler;

6. Long term use, low maintenance cost and good economic benefits

三、 What are the application industries of polymer trough idler?

There are various types of polymer trough idler. It is widely used in the environment with large outdoor dust and high corrosivity, such as steel plant, cement plant, salt farm, chemical fertilizer plant, wharf, power plant and so on.

四、 What is the groove angle of the grooved idler?

The standard groove angle of the groove upper idler is 35 degrees, so the most used in each conveyor are 35 degree groove idler and 35 degree groove forward tilt idler.

The different angles of the grooved idler have a great relationship with their supports, and the angles of different idler are different. Generally, they are divided into 35 degrees, 45 degrees and 30 degrees, but generally, the angle of the groove angle of the grooved idler is 35 degrees. When canvas conveyor belt is selected, only 35 degree groove buffer idler can be selected. When the 45 degree groove type buffer idler is used, the 45 degree groove type idler can be used in the section where the guide chute is not impacted by materials. This angle varies according to your transportation volume.

There are many kinds of idler products, but no matter which kind of idler products, their groove angle is generally the same. According to the different situation of matching different conveyors, the groove angle of the selected idler is different. Calculated according to the angle of material transportation, the larger the groove angle is, the greater the conveying capacity of the belt conveyor is. Just choose the right one according to your needs.

五、 What is the standard size of grooved idler support?

According to the types, the trough type supporting embankment supports are divided into: trough type self-aligning support, trough type forward tilting support, trough type support, trough type buffer idler support, etc. Among them, the trough type self-aligning support is the most special and has the function of deviation correction. It is mainly used to prevent the deviation of the conveyor during operation.

Specification parameters of idler support: first, specification: B500 b600 b650 B800 b1000 b1200 b1400 b1600, etc. you can also customize the specification and size according to the drawing

There is no unique standard for the size of trough type breakwater support, which should be customized according to their own needs.

Shaoxin supplies trough idler from stock. The roller skin is made of polymer material, long-life wear-resistant, self-lubricating protective belt, silent / environmental protection / flame retardant, lighter, lower resistance, lower enterprise maintenance cost, many advantages and more worry free for long-term use.